COOLING TOWER


MODEL T85P : 85 Tons Cooling at 225 GPM

Temptek TP Series Cooling Towers

SPECIFICATIONS

Model: T85PSL

 
(1) CAPACITIES
(2) Capacity:
Required Flow Rate: SL
DIRECT DRIVE FAN
Quantity:
RPM:
CFM: SL
MOTOR
Quantity:
Total Nameplate HP: SL
(3) FULL LOAD AMPERAGE
230/3/60:
460/3/60:
575/3/60: SL
CONNECTION SIZES
To Tower:
From Tower: SL
DIMENSIONS
Height:
Width:
Depth: SL
WEIGHT
Dry:
Wet:
(4) Shipping
 
85 tons
255 GPM SL
 
1
1,170
9 SL
 
1
5
SL
 

15.2
7.6
6.1 SL
 
4"
6" SL
 
138"
84"
73" SL
 
1,290 lbs
3,100 lbs
1,580 lbs

Notes
1. Derate heater output by 25% for 208/3/60 operation.
2. Consult factory for 50 HZ operation.
3. Unit weight crated for shipment.

TP Series fiberglass cooling towers Look Closer at the TP Series fiberglass cooling towers Product Literature for the TP Series fiberglass cooling towers Service Manual for the TP Series fiberglass cooling towers
Immediate Online Pricing for the T85P is available
Click For VT Series temperature control unit Pricing
(Registration Required)
Or Call 317-887-6352 to talk to a Factory Sales Associate.
STANDARD FEATURES

TOWER DESIGN:
• Single or multi cell designs
• Total non-ferrous construction materials
• Single inlet and drain connections on models up to 270 tons
• Induced draft air movement
• Structural galvanized steel base on 45 to 135 ton models
• Structural painted steel base on 170 to 540 ton models

SHELL CONSTRUCTION:
• High strength fiberglass molding
• 1/2” of structural thickness in reinforced areas
• UV stabilized coating
• Acrylic adhesive bonding between shell halves
• Polyurethane sealant

FAN:
• Air foil shaped blades for increased air flow
• Blades are made of a glass fiber reinforced polymer
• Direct drive
• Factory set for maximum air movement

MOTOR:
• TEFC construction
• Mounted on a stainless steel frame
• Supported on reinforced fiberglass shell area
• Mounted to shell with stainless steel fasteners

INLET LOUVERS:
• PVC construction
• Easily removed for cleaning
• Vertical orientation to eliminate ‘splash out’
• Directs air flow at proper angle for even distribution
• Helps prevent air-born debris from entering cell

DISTRIBUTION HEADER:
• Non-ferrous PVC ‘cross’
   construction
• Stationary
• Computer designed spray
   pattern
• Large orifice spray heads
• PVC spray heads
• Drift eliminator prevents
   over spray and water loss

WET DECK:
• Stacked honeycomb
   pattern maximizes
   water and air flow for
   greater cooling
   efficiency
• PVC construction

INSPECTION COVERS:
• Easily removed
• Seamless gasket sealing
• Allows for inspection of cell
   interior and replacement
   of wet deck

WARRANTIES:
• 10 year shell warranty
• 5 year motor/fan warranty

OPTIONS

FAN STARTER KIT:
• Motor starter contactor
• Motor overload relay
• Nema 1 enclosure
• Fan thermostat

SIDE OUTLET:
• PVC flange
• Factory installed

BASIN FLOAT VALVE:
• Mechanical float and valve
• 1/2” supply connection
• Factory or field installed

TOWER STAND:
• 10’ corner post design with
   cross bracing
• Ladder and railing
   attachments

Temptek provides Process cooling and heating equipment to major industry.
Remember Temptek for all your auxiliary needs, from portable and central chillers to cooling tower and pump tank systems to temperature controllers and material handling equipment
Temptek Auxiliary Equipment for every processing need.
Phone: 317-887-6352. Click for a convenient email form.
Temptek Auxiliary Equipment for every processing need.
Products Links
Temperature
Control Units
Liquid Chillers:
Portable
Liquid Chillers:
Central
Pump Tank
Stations
Cooling Towers
Vacuum Loaders
Desiccant Dryers
Material Granulators
Temptek, Inc.   525 East Stop 18 Road, Greenwood, IN 46142   Phone: 317-887-6352   Fax: 317-881-1277
   Product innovation and improvement is our constant goal. All features and specifications are subject to change without notice or liability. Products are assembled in the United States of America.      ©1998 - 2009 TEMPTEK, INC   Site Map LB