PRESSIDE GRANULATOR
EM Series : Specifications : Features : Options
The EM Series is designed for maximum versatility. This press side granulator is operator friendly, easy to service and maintain. Precision scissor cut action provides maximum through-put efficiency.
Product features include:
HOPPER
• Combination hopper for front (manual) feed or top (robotic feed)
• Hinged for easy opening for cleaning and servicing
NOISE CONTROL
• Engineered to meet 90 DBA or less for most materials
• Special steel / plate / steel laminate to reduce resonant noise
CUTTING CHAMBER
• Tangential feed design to reduce fly back
• Heavy duty welded steel construction
BEARINGS
• Oversized
• Outboard mounted
• Self aligning
• Pillow block housing
• Separated from cutting chamber to eliminate heat build-up or grease contamination from granulate
ROTOR
• 3 blade open type
• Knives mounted at a steep angle and counter angled to provide a precision scissor cut
KNIVES
• 3 Rotor
• 2 Bed
• D2 high carbon / high chrome tool steel
SCREEN
• 1/4” or 5/16” diameter holes
• Reversible
SCREEN CRADLE
• Easy handling of material
• Vacuum unloading with wand
DRIVE
• ODP motor
• V-belt
ELECTRICAL CONTROLS
• Magnetic starter
• Thermal overload
• Start / stop buttons
• Reduced voltage control circuit
SAFETY FEATURE
• Hopper and screen cradle are electrically and mechanically interlocked with a time delay safety bolt
WARRANTY & SERVICE
• 1 year on parts & labor
• Nationwide network of service contractors
Hopper / Cutting Chamber
Motor
HP
RPM
Full Load Amperage (1)
230/3/60
460/3/60
Through Put (Pounds Per Hour)
Dimensions
Depth (base)
Height to Infeed Tray
Height to Robotic Feed
Height to Infeed Tray
Width Depth (overall)
Shipping Weight
8" x 8"
3.0
437
8.3
4.1
200
30"
48"
58"
20-1/2"
39"
500 LBS
10" x 10"
7.5
437
20.4
10.2
300
31"
53"
65"
23"
40"
1000 LBS
12" x 16"
15.0
409
38.6
19.3
400
44"
58"
72"
32"
52"
1600 LBS
14" x 20"
25.0
400
68.0
34.0
600
55"
59"
75"
36"
72" (2)
2200 LBS
1. Full load amps are higher than run load amps must be used for sizing disconnects and supply wiring. Service disconnect by owner. Actual running amps at design conditions. Consult factory for 50hz operation.
2. This dimension includes blower evacuation.
Temptek, Inc. 525 East Stop 18 Road, Greenwood, IN 46142 Phone: 317-887-6352 Fax: 317-881-1277Product innovation and improvement is our constant goal. All features and specifications are subject to change without notice or liability. Products are assembled in the United States of America. ©2013 TEMPTEK, INC Site Map