PORTABLE CHILLER

SPECIFICATIONS

Model: CF-1.5A

 

(2) CAPACITY
TONS:
KW:
COMPRESSOR
HP:
TYPE:

PROCESS PUMP
HP:
GPM:
PSI:
TYPE:
CONSTRUCTION:
CONNECTION SIZES
TO:
FROM:
WATER MAKE-UP:
AIR-COOLED CONDENSER
TYPE:
CFM:
(3) AMBIENT:

(4) FULL LOAD
AMPERAGE
230/1/60:
TANK CAPACITY
HOLDING:
LID:
AUTO MAKE-UP:

DIMENSIONS
Height:
Width:
Depth:
(5) WEIGHT
Shipping:

   
1.5
4.73

 
1.5
Hermetic Reciprocati
 
1/2
3.6
60
Positive Displacemen
Brass
 
1/2"
1/2"
--"
 

Fan
1.1
90 °F
 
 
20
 
4 gal
Standard
Optional
 
37"
19"
25"
 
255 lbs

Specification Notes:
1. Since product innovation and improvement is our constant goal, all features and specifications are subject to change without notice or liabililty. Selection of certain optional features may change listed specifications.
2. Tons capacity at 12,000 BTU/ton @ 50°F LWT @ 115°F condensing temperature. Capacities may be +/5% as reserved by the compressor manufacturer. Capacity multipliers are 50°F - 1.00 ; 40°F - .80 ; 30°F - .60 ; 20°F - .40. The minimum recommended operating temperature when no glycol is used is 48°F.
3. Design ambient conditions. Loss of capacity and/or difficulty operating will occur at higher ambients.
4. Full load amps are higher than run load amps and must be used for sizing disconnects and supply wiring.
5. Approximate unit weight crated for shipment.

Immediate Online Pricing for the CF-1.5A is available

FEATURES

FRAME CONSTRUCTION:
• Stainless steel sheet metal
• Lift-off top
• Compact physical size
• Castors - for portability

REFRIGERANT CIRCUITS:
• Hermetic compressors
• Air-cooled condenser with
   finned tubes
• Propeller fan(s) induced
  air flow
• Refrigerant sight glass with
  moistureindicator
• Filter-drier
• Liquid line solenoid valve
• Thermostatic expansion valve
• Coaxial evaporator

COOLANT CIRCUIT:
• Brass vane pump
• Large capacity insulated
  non-ferrous reservoir
  (no tank lid offered on this model).
• Reservoir level sight glass
• Standard NPT process fittings

ELECTRICAL:
• Process pump motor starter
• Compressor motor contactor
• Fused transformer
• Nema rated electrical cabinet
• Power entry terminal block
• Factory installed 10' power cord

SYSTEM LIMIT DEVICES:
• High pressure limit
• Low pressure limit
• Coolant freezestat
• Internal compressor overload
• Control circuit fuse

WARRANTIES:
• 1 year on parts and labor

INSTRUMENT

• Continuous To Process
  temperature display
• Selectable Setpoint
  temperature display
• Illuminate ON/OFF power
  switch
• Soft touch Setpoint
  selection keys
• Bright and easy-to-read
  LCD emperature display
• Machine Status with
  Compressor and Capacity
  Control indicating lights
• Basic Machine Diagnostics
  with Refrigeration Fault
  indicating light