PORTABLE CHILLER

SPECIFICATIONS

Model: CF-15A

 

(2) CAPACITY
TONS:
KW:
COMPRESSOR
HP:
TYPE:
PROCESS PUMP
HP:
GPM:
PSI:
TYPE:
CONSTRUCTION:
CONNECTION SIZES
TO:
FROM:
WATER MAKE-UP:
AIR-COOLED CONDENSER
TYPE:
CFM:
(3) AMBIENT:
(6) SP:

(4) FULL LOAD
AMPERAGE
230/3/60:
460/3/60:
575/3/60
TANK CAPACITY
HOLDING:
LID:
AUTO MAKE-UP:

DIMENSIONS
Height:
Width:
Depth:
(5) WEIGHT
Shipping:

   
15
52.6

 
15
Scroll
 
3
36
55
Centrifugal
Stainless Steel
 
2"
2"
1/2"
 

Blower
15,000
95 °F

 
 
85
42
36

 
65 gal
Standard
Optional
 
96"
58"
70"
 
2,300 lbs

Specification Notes:
1. Since product innovation and improvement is our constant goal, all features and specifications are subject to change without notice or liabililty. Selection of certain optional features may change listed specifications.
2. Tons capacity at 12,000 BTU/ton @ 50°F LWT @ 115°F condensing temperature. Capacities may be +/5% as reserved by the compressor manufacturer. Capacity multipliers are 50°F - 1.00 ; 40°F - .80 ; 30°F - .60 ; 20°F - .40. The minimum recommended operating temperature when no glycol is used is 48°F.
3. Design ambient conditions. Loss of capacity and/or difficulty operating will occur at higher ambients.
4. Full load amps are higher than run load amps and must be used for sizing disconnects and supply wiring.
5. Approximate unit weight crated for shipment.
6. Static pressure in inches of water.

Immediate Online Pricing for the CF-15A is available

FEATURES

FRAME CONSTRUCTION:
• Powder coated steel upright frame
• Galvanized steel cross frame
• Powder coated steel lift-off cabinetry
• Lift-off top panel
• Thermoformed ABS front fascia
• Compact physical size
• Castors - for portability

REFRIGERANT CIRCUITS:
• Scroll compressors
• Air-cooled condenser with
   finned tubes
• Centrifugal Blower induced air flow
• Refrigerant sight glass with
  moistureindicator
• Filter-drier
• Liquid line solenoid valve
• Thermostatic expansion valve
• Brazed plate evaporator

COOLANT CIRCUIT:
• High Flow Centrifugal pump
• Large capacity insulated
  non-ferrous reservoir
• Reservoir level sight glass
• Automatic water make-up system
• Standard NPT process fittings

PRESSURE GAUGES:
• Refrigerant high pressure
• Refrigerant low pressure
• Coolant pressure

ELECTRICAL:
• Process pump motor starter
• Compressor motor contactor
• Fused transformer
• Nema rated electrical cabinet
• Power entry terminal block

SYSTEM LIMIT DEVICES:
• High pressure limit
• Low pressure limit
• Coolant freezestat
• Process pump motor overload
• Internal compressor overload
• Control circuit fuse

WARRANTIES:
• 1 year on parts and labor

INSTRUMENT

M1 Series (standard instrument)
• Continuous To Process temperature display
• Selectable Setpoint temperature display
• Illuminate ON/OFF power switch
• Soft touch Setpoint selection keys
• Bright and easy-to-read LCD Temperature
  display window
• Machine Status with Compressor and
  Capacity Control indicating lights
• Basic Machine Diagnostics
  with Refrigeration
  Fault indicating light