Click Here for An Immediate Factory Pricing Quote For the CF-.75A ▶
Pricing Is Now On Display
Specifications
Model: CF-.75A (1)
Capacity
(2) Tons : .75
kW : 2.53
Compressor
HP : .75
Type : Hermetic Reciprocating
Process Pump
HP : 1/3
GPM : 1.8
PSI : 60
Type : Positive Displacement
Construction : Brass
Automatic Low Flow Bypass: : Standard
Air-Cooled Condenser
Type : Fan
CFM : 680
(3) Ambient : 90°F
Refrigerant
Type : R-134A
Full Load Amperage (4)
115/1/60 : 21
230/1/60 : 11
Reservoir Capacity
Holding : 4 gal
Lid : Standard
Auto Make-Up : Optional
Process Connections
To Process : 1/2"
From Process : 1/2"
Dimensions
Height : 37"
Width : 19"
Depth : 25"
Weight (5)
Shipping : 265 lbs
Specification Notes:
Since product innovation and improvement is our constant goal, all features and specifications are subject to change without notice or liability. Selection of certain optional features may change listed specifications.
Tons capacity at 12,000 BTU/ton per hour @ 50°F LWT @ " 115°F condensing temperature. Capacities may be +/- 5% as reserved by the compressor manufacturer. Operating at temperatures below 50° will reduce chiller capacity. The minimum recommended operating temperature when no glycol is used is 48°F.
Design ambient conditions. Loss of capacity and/or difficulty operating will occur at higher ambients. Minimum recommended ambient is 60°F.
Full load amps are higher than run load amps and must be used for sizing disconnects and supply wiring.
Approximate unit weight crated for shipment.
Features
Refrigerant Circuit
HFC-134A refrigerant - Non-Ozone Depleting - Low global warming impact
Hermetic compressor
Air-cooled condenser with finned tubes
Propeller fan(s) induced air flow
Referant sight glass with moisture indicator
Filter-drier
Thermostatic expansion valve
Coolant Circuit
Positive displacement pump
Insulated non-ferrous reservoir (tank lid is standard on this model)