Recommended throughput of 600 lb/hr with 700 lb/hr maximum.
Temptek VL Series Vacuum Loaders provide self-contained vacuum transfer of plastics pellets and regrinds over short distances using powerful single-phase vacuum motors.
Standard models are made for flange moutning to existing bins or hoppers.
Micro PLC based control with complete programming and monitoring capabilities, graphic faceplate displaying parameter value codes and providing step-by-step programming instructions. The control can be remotely located at operator level.
lb/ft3 : 1/2
lbs : 19
Inches : 2
Machine Mount Discharge Diameter
Inches : 2
Recommended (max) Thoughput / Hr.
lbs : 600 (700)
Maximum Conveying Distance
Feet : 50
Seconds : up to 99
@ 115V : 13
Compressed Air Usage
CFM : .2
A : 32"
B : 26"
C : 15"
D : 10"
1. All models with standard 2 lb. capacity glass : add 3" to Dimension A above.
2. Resin capacity and throughput based on 38 lb./ft3 bulk density. Adding external proportioning valve reduces throughput.
3. Max rate based on use with 10' (ft) flex hose. Recommended average rates produce optimal use and life expectancy, exceeding the maximum recommended rates will shorten motor and brush life.
4. Horizontal distance based on transporting virgin resin through tubing. Vertical travel, bends and flex hose will reduce conveying distance.
Temptek, Inc. 525 East Stop 18 Road, Greenwood, IN 46142 Phone: 317-887-6352 Fax: 317-881-1277
Product innovation and improvement is our constant goal. All features and specifications are subject to change without notice or liability. Products are
assembled in the United States of America. Site Map
2019 TEMPTEK, INC