Central Chilling Module | 90 Ton | Water-Cooled | Triple Zone
Click Here for An Immediate Factory Pricing Quote For the MW-90-CCC ▶
Pricing Is Now On Display
Water-cooled central chilling modules use mechanical refrigeration to cool recirculated fluids that support industrial process cooling applications.
20°F to 70°F process fluid temperature range.
This chiller combines one or more refrigeration circuits to chill fluid. A separate reservoir and pumping system is required to circulate chilled fluid to the use points.
Water-Cooled chillers use a city or tower water south to dissipate the heat from the refrigeration system.
Model: MW-90-CCC (1)
Quantity : 3
Quantity : 3
HP : 30
Type : Scroll
(2)Total Capacity : 90
Type : R-410A
To Process : 4"
From Process : 4"
Full Load Amperage(3)
230/3/60 : 396.0
460/3/60 : 198.0
575/3/60 : 159.0
Height : 85"
Width : 74"
Depth : 130"
Shipping : 3,300 lbs
Since product innovation and improvement is our constant goal, all features and specifications are subject to change without notice or liability. Selection of certain optional features may change listed specifications.
Tons capacity at 12,000 BTU/ton per hour @ 50°F LWT @ 115°F condensing temperature. Capacities may be +/5% as reserved by the compressor manufacturer. Capacity multipliers are 50°F - 1.00 ; 40°F - .80 ; 30°F - .60 ; 20°F - .40.
Full load amps are higher than run load amps and must be used for sizing disconnects and supply wiring. Not for construction. Consult factory for power requirements of unit as configured and on selected options.
Consult factory for 50HZ operation.
Approximate dimensions. Not for construction purposes.