Evaporative Cooling | Energy Efficient | Non Ferrous
TPT-170G3
Click Here for An Immediate Factory Pricing Quote For the TPT-170G3 ▶
Pricing Is Now On Display
Product Overview
Cooling towers are simple to operate and utilize energy efficient evaporative cooling.
Cooling Towers are typically used to supply cooling temperatures between 5°F to 10°F above the ambient wet bulb conditions.
Warm water returning from the process is evenly distributed over the wet desk. Counter airflow driven by the fan causes a portion of the warm process water to evaporate cooling the remaining water.
Offering cooling towers in capacities from 45 to 270 tons in single and expanded cell systems.
Price is Loading
Specifications
Model: TPT-170G3 (1)
Capacity(2)
Capacity : 170 tons
Flow Rate : 510 GPM
Direct Drive Fan
Quantity : 2
RPM : 1,170
CFM : 43,400
Motor
Quantity : 2
HP : 5
Total HP : 10
Full Load Amperage(3)
230/3/60 : 24.2
460/3/60 : 12.1
575/3/60 : 10.0
Connection Sizes
To Tower : 2@4"
(5)From Tower : 2@6"
From Tower Location : bottom
Dimensions
Height : 140"
Width : 190"
Depth : 80"
Weight
Dry : 2,210lbs
Operating : 5,600 lbs
Shipping : 2,210 lbs
Specification Notes:
Since product innovation and improvement is our constant goal, all features and specifications are subject to change without notice or liability. Selection of certain optional features may change listed specifications.
Cooling water from 95°F to 85°F at 3 gpm per ton and 78°F wet-bulb temperature.
Full load amps are higher than run load amps and must be used for sizing disconnects and supply wiring. Not for construction. Consult factory for power requirements of unit as configured and with selected options.
Consult factory for 50HZ operation.
Connection sizes shown are when the tower is used with remote sump. Consult factory for connection size when the base of the tower will be used as the reservoir.
2.0 MB
